|
Hazardous Material Storage Buildings |
|
|
Specifically designed for outdoor hazardous material storage and dispensing from 55-gallon drums
containing flammable or combustible liquids. Outer wall is constructed of
all-welded 16 or 12 gauge steel. Inner wall is constructed of 20 gauge steel. The
double wall construction contains 3" of air space throughout. All Hazmat Storage Buildings are designed in
accordance with the standards set forth by NFPA Code 30 and comply with OSHA
and EPA regulations. All models are FM Approved for the storing and
dispensing of flammable and combustible liquids. All electrical
installations are U.L. Approved & Compliant to 1999 & 2002 NEC.
Features Include:
- Exterior Walls: (Models B200X through B1200x)
16 or 12 gauge galvannealed steel
- Interior Walls: 20-gauge galvannealed steel (3" air space between walls)
- Sump: 12-gauge steel liquid tight, continuously welded.
- Grating: Removable galvanized steel
- Forklift channel: 12 gauge galvanized steel
- Grounding: OSHA Compliant Static ground connection inside and out on all explosion rated models
- Labeling: NFR warning label, Hazard Ratings System, Instructions
- Venting: Natural convection vents
- Explosion Relief Panels: 22 gauge steel opening protected by expanded steel
- Available with 2 or 4 hour fire rating
- Chemical/corrosive/ultraviolet resistant paint
- Removable galvanized steel safety floor planking
Tornado Resistant Walls
SECURALL Hazardous Material Storage Buildings have been tested to determine the amount of force they can withstand and were shown to withstand F-4 tornado force winds of 250 mph...More Construction Features & Fire Rating...
|
|
|
Steel Safety Cabinets
|
 SECURALL Product Category |
|
|
|
|
|
|
|
|
|
|